|
| |
| 30" DEEP CANISTER - Part #: AL-150-30 |
 Use the 30" canister when equipment is elevated above water level 12 -18". It allows easy access when servicing and a wider range of acceptable water levels usually occurring with small bodies of water
Price: $303.00
|
|
| FLOAT CHAMBER - Part #: FC-150-17 |
 The heart of the kit, use only if existing unit is defective or damaged. 17 chamber used when equipment elevation to pool water level is equal or below.
Price: $117.60
|
|
| FLOAT CHAMBER - Part #: FC-150-30 |
|
The heart of the kit, use only if existing unit is defective or damaged. 30 chamber for elevated equipment applications.
Price: $152.60
|
|
| FLOAT ASSEMBLY - Part #: FA-150 |
 Used to close plunger supply valve when actual pool water level reaches set point. Float assembly is installed inside float chamber.
Price: $46.20
|
|
| PLUNGER VALVE - Part #: PV-150 |
 Regulates supply water at a rate equal to demand, does not water hammer pipes as it cycles on and off.
Price: $21.60
|
|
| SADDLE TEE - Part #: ST-150 |
 Use when plumbing can't be separated for normal solvent welded fittings or for tight access installations.
Price: $48.03
|
|
| REDUCING TEE 2X2X1 - Part #: RT-150 |
 1 barbed for easy installation of equalizer line in wet applications. This is the preferred method of tapping existing plumbing lines.
Price: $7.78
|
|
| WATER SUPPLY KIT - Part #: WSK |
 Includes brass hose bib adapter, filter screen & 3/8"x5' flexible UV tubing.
Price: $27.23
|
|
| EQUALIZER LINE 4' PIECE - Part #: EL-150-4 |
 Connects the float chamber to the pool via the return plumbing lines.
Price: $18.20
|
|
| CLEAR LEVELING TUBE ASSEMBLY - Part #: CLT |
 Helps find exact level of pool water over at the equipment area, even works when equipment is 100 feet or more away.
Price: $10.86
|
|
| 25 FT 3/8 - Part #: NT-3825 |
 Use to run supply water to sensor chamber, is easy to conceal, easy to work with.
Price: $43.30
|
|
| 50 FT 3/8 - Part #: NT-3850 |
|
Use to run supply water to sensor chamber, is easy to conceal, easy to work with.
Price: $78.30
|
|
| WALL MOUNTING BRACKET - Part #: WMB-150 |
 This sturdy bracket is used to mount the float chamber on a wall, post or fence when pool equipment is installed at a lower elevation than the pool itself.
Price: $29.40
|
|
